Specifications: Fluke 805 Vibration Meter Vibration Meter Low frequency range (overall measurement) 10 Hz to 1,000 Hz High frequency range (CF measurement) 4,000 Hz to 20,000 Hz Severity levels Good, satisfactory, unsatisfactory, unacceptable Vibration limit 50 g peak (100 g peak-peak) A/D converter 16-bit Signal to noise ratio 80 dB Sampling rate Low frequency 20,000 Hz High frequency 80,000 Hz Real time clock backup Coin battery Sensor Sensitivity 100 mV g ±10% Measurement range 0.01 g to 50 g Low frequency range (overall measurement) 10 Hz to 1,000 Hz High frequency range 4,000 Hz to 20,000 Hz Resolution 0.01 g Accuracy At 100 Hz ±5% of measured value Amplitude Units Acceleration g, m/sec² Velocity in/sec, mm/sec Displacement mils, mm Infrared Thermometer (Temperature Measurement) Range -20°C to 200°C (-4°F to 392°F) Accuracy ±2°C (4°F) Focal length Fixed, at ~3.8 cm (1.5 in) External sensor Fluke supports but does not provide external sensors Frequency range 10 Hz to 1,000 Hz Bias voltage (to supply power) 20 VDC to 22 VDC Bias current (to supply power) Maximum 5 mA Firmware External interfaces USB 2.0 (full speed) communication Data capacity Database on internal flash memory Upgrade Through USB Memory Up to 3,500 measurements Radiated Emission Electrostatic discharge: burst Standard EN 61000-4-2 Electromagnetic interference Standard EN 61000-4-3 RE Standard CISPR 11, Class A Environmental Operating temperature -20°C to 50°C (-4°F to 122°F) Storage temperature -30°C to 80°C (-22°F to 176°F) Operating humidity 10% to 95% RH (non-condensing) Operating/storage altitude Sea level to 3,048 meters (10,000 feet) IP rating IP54 Vibration limit 500 g peak Drop test 1 meter General Specifications Battery type AA (2) Lithium Iron Disulfide Battery life 250 measurements Size (L x W x H) 24.1 x 7.1 x 5.8 cm (9.5 x 2.8 x 2.3 in) Weight 0.40 kg (0.89 lb) Connectors USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), external sensor jack (SMB connector)
