$52.07
$89.04
Features: Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters Power transmitters during test using loop supply with simultaneous mA measurement Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results Holds up to a full week of downloaded procedures and calibration results. Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc. Easy to use Three year warranty Bright white dual display. Read both sourced and measured parameters simultaneously. Multi lingual interface Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge. Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms. Delivered with DPC/Track Sample software. Compatible with many Asset Management software packages. Specifications: Measurement Accuracy Voltage DC 1 Year 2 Years 100.000 mV 0.02% 0.005 mV 0.03% 0.005 mV 3.00000 V 0.02% 0.00005 V 0.03% 0.00005 V 30.0000 V 0.02% 0.0005 V 0.03% 0.0005 V 300.00 V 0.05% 0.05 V 0.07% 0.05 V Voltage AC Range 40 to 500Hz Resolution 1 Year 2 Years 3.000 V 0.001 V 0.5% 0.002 V 1.0% 0.004 V 30.00 V 0.01 V 0.5% 0.02 V 1.0% 0.04 V 300.0 V 0.1 V 0.5% 0.2 V 1.0% 0.2 V Current DC 1 Year 2 Years 30.000 mA 0.01% 5 uA 0.015% 7 uA 110.00 mA 0.01% 20 uA 0.015% 30 uA Resistance 1 Year 2 Years 10.000 O 0.05% 50 mO 0.07% 70 mO 100.00 O 0.05% 50 mO 0.07% 70 mO 1.0000 kO 0.05% 500 mO 0.07% 0.5 O 10.000 kO 0.1% 10 O 0.15% 15 O Frequency Resolution Accuracy (2 Years) 1.00 to 110.00 Hz 0.01 Hz 0.05 Hz 110.1 to 1100.0 Hz 0.1 Hz 0.5 Hz 1.101 to 11.000 kHz 0.001 kHz 0.005 kHz 11.01 to 50.00 kHz 0.01 kHz 0.05 kHz Source Accuracy Voltage DC 1 Year 2 Years 100.000 mV 0.01% 0.005 mV 0.015% 0.005 mV 1.00000 V 0.01% 0.00005 V 0.015% 0.0005 V 15.0000 V 0.01% 0.0005 V 0.015% 0.0005 V Current DC 1 Year 2 Years 22.000 mA (Source) 0.01% 0.003 mA 0.02% 0.003 mA Current Sink (Simulate) 0.02% 0.007 mA 0.04% 0.007 mA Resistance 1 Year 2 Years 10.000 O 0.01% 10 mO 0.015% 15 mO 100.00 O 0.01% 20 mO 0.015% 30 mO 1.0000 kO 0.02% 0.2 O 0.03% 0.3 O 10.000 kO 0.02% 3 O 0.03% 5 O Frequency 2 Years 0.1 to 10.99 Hz 0.01 Hz 0.01 to 10.99 Hz 0.01 Hz 11.00 to 109.99 Hz 0.1 Hz 110.0 to 1099.9 Hz 0.1 Hz 1.100 to 21.999 kHz 0.002 kHz 22.000 to 50.000 kHz 0.005 kHz Technical Data Data Log Functions Measure functions: Voltage, current, resistance, frequency, temperature, pressure Reading rate: 1, 2, 5, 10, 20, 30, or 60 readings/minute Maximum record length: 8000 readings (7980 for 30 or 60 readings/minute) Ramp Functions Source functions: Voltage, current, resistance, frequency, temperature Rate: 4 steps/second Trip detect: Continuity or voltage (continuity detection not available when sourcing current) Loop Power Function Voltage: Selectable, 26 V Accuracy: 10%, 18 V minimum at 22 mA Maximum current: 25 mA, short circuit protected Maximum input voltage: 50 V DC Step Functions Source Functions Voltage, current, resistance, frequency, temperature Manual Step Selectable step, change with arrow buttons Autostep Fully programmable for function, start delay, stepvalue, time per step, repeat Environmental Specifications Operating Temperature -10 °C to 50 °C Storage Temperature -20 °C to 60 °C Dust/water resistance Meets IP52, IEC 529 Operating Altitude 3000 m above mean sea level (9842 ft) Mechanical & General Specifications Size 136 x 245 x 63 mm (5.4ﾓ x 9.6 x 2.5) Weight 1.2 kg (2.7 lb) Batteries Internal Battery Pack Li-ion: 7.2V, 4400mAh, 30 Wh Battery Life >8 hours typical Battery Replacement Replace without opening calibrator; no tools required Side port connections Pressure module connector USB Connector to interface to your PC Digital instrument (HART) connector Connection for optional battery charger/eliminator Data storage capacity 1 week of calibration procedures results Temperature, Resistance Temperature Detectors Degrees or % of reading Type (a) Range °C Measure °C1 Source current Source °C Allowable current 1 year 2 year 1 year 2 year 100 O Pt (385) -200 to 100 100 to 800 0.07 °C 0.02 % 0.05 °C 0.14 °C 0.04 % 0.10 °C 1 mA 0.05 °C 0.0125 % 0.04 °C 0.10 °C 0.025 % 0.08 °C 0.1 mA to 10 mA 200 O Pt (385) -200 to 100 100 to 630 0.07 °C 0.02 % 0.05 °C 0.14 °C 0.04 % 0.10 °C 500 µA 0.06 °C 0.017 % 0.05 °C 0.12 °C 0.034 % 0.10 °C 0.1 mA to 1 mA 500 O Pt (385) -200 to 100 100 to 630 0.07 °C 0.02 % 0.05 °C 0.14 °C 0.04 % 0.10 °C 250 µA 0.06 °C 0.017% 0.05 °C 0.12 °C 0.034 % 0.10 °C 0.1 mA to 1 mA 1000 O Pt (385) -200 to 100 100 to 630 0.07 °C 0.02 % 0.05 °C 0.14 °C 0.04% 0.10 °C 150 µA 0.06 C 0.017 % 0.05 °C 0.12 C 0.034 % 0.10 °C 0.1 mA to 1 mA 100 O Pt (3916) -200 to 100 100 to 630 0.07 °C 0.02 % 0.05 °C 0.14 °C 0.04 % 0.10 °C 1 mA 0.05 °C 0.0125 % 0.04 °C 0.10 °C 0.025 % 0.08 °C 0.1 mA to 10 mA 100 O Pt (3926) -200 to 100 100 to 630 0.08 °C 0.02 % 0.06 °C 0.16 °C 0.04 % 0.12 °C 1 mA 0.05 °C 0.0125 % 0.04 °C 0.10 °C 0.025 % 0.08 °C 0.1 mA to 10 mA 10 O Cu (427) -100 to 260 0.2 °C 0.4 °C 3 mA 0.2 °C 0.4 °C 0.1 mA to 10 mA 120 O Ni (672) -80 to 260 0.1 °C 0.2 °C 1 mA 0.04 °C 0.08 °C 0.1 mA to 10 mA
Electric Item
